 |
|
|
|
|
 |
|
 |
|
|
 |
DESCRIPTION
MORWEAR PLUS Advanced Mold Control Paint™ High Hiding Wall Primer is for use on interior drywall, plaster, concrete, brick, acoustical tile and all types of drywall materials, including drywall manufactured with recycled paper. May be used as a primer coat before and after texturing. It is designed to provide a uniform base suitable for any type of finish coat and has excellent enamel holdout when used under enamel finished coats. Contains an EPA registered mildewcide to protect the paint film only from mildew and mold.
| PRODUCT CHARACTERISTICS |
PERFORMANCE |
|
Vehicle Type |
Vinyl Acrylic Emulsion |
|
Weight per gallon |
10.86 |
|
Viscosity (KU) |
90-95 |
|
Solids by weight: |
43.57% |
|
Solids by volume: |
26.65% |
|
Maximum VOC (g/l): |
98.57 |
Typical Thickness
Wet (mils)
Dry (mils) |
5.6
1.5 |
|
Typical Coverage (sq. ft. /gal) |
250 - 350 (Varies due to surface porosity and texture, application method.) |
Dry Time (77° F. / 55% R H)
Set to Touch (hr.)
recoat (hr.)
Through Dry (hr.) |
1/2 - 1
4
18 |
|
Gloss (60° angle) |
0 - 5 |
PERFORMANCE TESTING RESULTS
| TEST |
RESULTS |
Hide
(ASTM D 2805) |
95.30 |
Sag Resistance
(ASTM D 4400) |
12+ |
Adhesion (Tape Test) **
(ASTM D 3359) |
5B |
Freeze-Thaw Stability
(ASTM D 2243) |
Pass
(3 cycles) |
Heat Stability
(ASTM D 1849) |
Pass
(No change 3 weeks @ 120°F) |
| Enamel Holdout |
Excellent |
* On a scale from 1-10 (10 = Best, 0 = Poor)
** On a scale from 0B-5B (5B = 0% area removed, 0B = Greater than 65% area is removed)
|
|
|
|
|
