 |
|
|
|
|
 |
|
 |
|
|
 |
DESCRIPTION
MORWEAR PLUS Advanced Mold Control Paint™ premium quality, quick-drying, water based 100% Acrylic Stain Blocking Primer has excellent tannin and household stain blocking ability. For interior or exterior use over new or previously painted surfaces. Excellent for use over bleeding-type wood surfaces such as redwood, cedar and fir, smoke and water stains, masonry, stucco, brick, concrete, moderately chalky surfaces, and non-ferrous metals like aluminum and galvanized. This product has excellent alkali, efflorescence, and flash rust resistance. Contains an EPA registered mildewcide to protect the paint film only from mildew and mold. Note: Some stains may discolor the primer, but the stains will not bleed through the topcoat.
| PRODUCT CHARACTERISTICS |
PERFORMANCE |
| Vehicle Type |
100% Acrylic Emulsion |
| Weight per gallon |
10.51 |
| Viscosity (KU) |
90-95 |
| Solids by weight: |
53.96% |
| Solids by volume: |
42.10% |
| Maximum VOC (g/l): |
100 |
Typical Thickness
Wet (mils)
Dry (mils) |
3.6
1.5 |
| Typical Coverage (sq. ft. /gal) |
300 - 400 (Varies due to surface porosity and texture, application method.) |
Dry Time (77° F. / 55% R H)
Set to Touch (hr.)
recoat (hr.)
Through Dry (hr.) |
1/2 - 1
4
18 |
| Gloss (60° angle) |
0 - 5 |
PERFORMANCE TESTING RESULTS
| TEST |
RESULTS |
Hide
(ASTM D 2805) |
95.39 |
Sag Resistance
(ASTM D 4400) |
12+ |
Adhesion (Tape Test) **
(ASTM D 3359) |
5B |
Freeze-Thaw Stability
(ASTM D 2243) |
Pass
(No change 3 weeks @ 120°F) |
| Enamel Hold Out |
Excellent |
| Stain Blocking |
Excellent
(288 hours in QCT cabinet) |
Heat Stability
(ASTM D 1849) |
Pass
(No change 3 weeks @ 120°F) |
* On a scale from 1-10 (10 = Best, 0 = Poor)
** On a scale from 0B-5B (5B = 0% area removed, 0B = Greater than 65% area is removed)
|
|
|
|
|
