 |
|
|
|
|
 |
|
 |
|
|
 |
DESCRIPTION
MORWEAR PLUS Advanced Mold Control Paint™ premium quality 100% Acrylic Satin Enamel offers the decorative appearance of a velvet finish yet resists dirt pick-up like a semi-gloss enamel. Recommended for all surfaces where a durable, scrubbable, satin finish is desired. Use over drywall, plaster, masonry, brick, stucco, concrete, primed wood, primed metal and other sound, previously painted surfaces. Formulated with high build characteristics for excellent hide and ease of application. Contains an EPA registered mildewcide to protect the paint film only from mildew and mold.
| PRODUCT CHARACTERISTICS |
PERFORMANCE |
| Vehicle Type |
100% Acrylic Emulsion |
| Weight per gallon |
10.71 |
| Viscosity (KU) |
98-103 |
| Solids by weight: |
50.84% |
| Solids by volume: |
36.98% |
| Maximum VOC (g/l): |
50 |
Typical Thickness
Wet (mils)
Dry (mils) |
4.3
1.5 |
| Typical Coverage (sq. ft. /gal) |
300 - 400 (Varies due to surface porosity and texture, application method.) |
Dry Time (77° F. / 55% R H)
Set to Touch (hr.)
recoat (hr.)
Through Dry (hr.) |
1/2 - 1
4
18 |
| Sheen (85° angle) |
10 - 15 |
PERFORMANCE TESTING RESULTS
| TEST |
RESULTS |
Hide
(ASTM D 2805) |
96.35 |
Flow Leveling (Draw down method)*
(ASTM D 4062) |
8 |
Sag Resistance
(ASTM D 4400) |
12+ |
Scrub Resistance
(ASTM D 2486) |
600-650 Cycles |
Block Resistance
(ASTM D 4946), High Temp. 125° F |
10 |
Adhesion (Tape Test) **
(ASTM D 3359) |
5B |
Accelerated Weathering (QUV)
(ASTM D 5487) |
Pass
(2000 hours no change) |
Freeze-Thaw Stability
(ASTM D 2243) |
Pass
(3 cycles) |
Heat Stability
(ASTM D 1849) |
Pass
(No change 3 weeks @ 120°F) |
Water Spotting
(ASTM D 1308) |
None |
* On a scale from 1-10 (10 = Best, 0 = Poor)
** On a scale from 0B-5B (5B = 0% area removed, 0B = Greater than 65% area is removed)
|
|
|
|
|
